ANSI Z41 Protective Footwear Standard has been withdrawn and replaced with ASTM

 F 2412-05 Standard Test Method for Foot Protection and F 2413-05 Standard Specification for Performance Requirements for Foot Protection.
The changes made during this transition are:
Removed Class 30 Impact and Compression
Compression uses a clay cylinder and stabilizer fork
Conductive replaces 5 lb electrode with BB’s in shoes to depth of 1.18 in.(30 mm)
No SD Type II
Added chain saw protection
Added dielectric insulation
Report the minimum height of the clay without rounding up
Label ASTM F 2413-05 replaces ANSI Z41 PT99

 The following is a list of categories that have compression results between 2,500 to 2,600 lbs.  We need to re-test all the below categories using the new ASTM F 2412-05 standard.

 Harley-Davidson – DS-18, DS-21

 HYTEST – KS-31, KS-42, KS-71, KS-78, KS-79, KS-27 & K-27, K-25, K-85 

Wolverine Brand – W-9, W-18 & WS-6, WS-7, WS-37, WS-39, WS-42, WS-74,

WS-84, WS-85, WS-90, WS-92, WS-98, WS-105, WS-110

Caterpillar – PS-35, PS-48, PS-63, PS-78, PS-86 

Stanley – XS-6 

Bates – ES-7, ES-8, ES-9
以上由护足鞋业有限公司提供。下载需注明出自：http://www.aqshoes.com。公司专业生产：安全鞋、工作鞋、劳保鞋。不注明则不能下载！