Toe protection: Code I footwear
鞋头保护：代码I的鞋类
The back edge of the toe cap must be covered
by an additional material
鞋头盖必须被额外的材料覆盖
The toe cap must have a minimum lengthmpact test set-up 冲击测试装置Minimum requirements 最低要求
• EN ISO 20345 - minimum impact energy 200J
EN ISO 20345 – 最小冲击能量 200J
• EN ISO 20346 - minimum impact energy 100J
EN ISO 20346 - 最小冲击能量 100J
• No cracking through the cap along the test axis
鞋头盖沿着测试轴线不能有裂痕
• Clay cylinder height after impact must meet
minimum requirements
黏土圆柱冲击后的高度必须符合最小要求
鞋头盖长度必须有最低要求 Compression test set-up 压缩测试装置Minimum requirements 最小要求
• EN ISO 20345 - minimum compression load 15kN
EN ISO 20345 – 最小压缩荷重 15kN
• EN ISO 20346 - minimum compression load 10kN
EN ISO 20346 – 最小压缩荷重 10kN
• Clay cylinder height after impact must meet minimum
requirements
• 黏土圆柱冲击后的高度必须符合最小要求
